描述 Description

The MIC3003GFL is a fiber optic module controller which enables the implementation of sophisticated, hot-pluggable fiber optic transceivers with intelligent laser control and an internally calibrated Digital Diagnostic Monitoring Interface per SFF-8472. It essentially integrates all non-data path functions of an SFP/SFP+ transceiver into a tiny ( 3mm x 3mm) MLF? package. It also works well as a microcontroller peripheral in transponders or 10Gbps transceivers. The MIC3003GFL uses the same die as the MIC3003 with all its functions, but in a smaller package and different pin out.A highly configurable automatic power control (APC) circuit controls laser bias. Bias and modulation are temperature compensated using dual DACs, an on-chip temperature sensor, and NVRAM look-up tables. A programmable internal feedback resistor provides a wide dynamic range for the APC. Controlled laser turn-on.An analog-to-digital converter converts the measured temperature, voltage, bias current, transmit power, and received power from analog to digital. An EEPOT provides front-end adjustment of RX power. Each parameter is compared against user-programmed warning and alarm thresholds. Analog comparators and DACs provide fast monitoring of received power and critical laser operating parameters. Data can be reported as either internally calibrated or externally calibrated.An interrupt output, power-on hour meter, and data-ready bits add user friendliness beyond SFF-8472. The interrupt output and data-ready bits reduce overhead in the host system. The power-on hour meter logs operating hours using an internal real-time clock and stores the result in NVRAM.In addition to the features listed above, the MIC3003 features an extended temperature range, options to mask alarms and warnings interrupt and TXFAULT, a reset signal source, and the ability to support up to four chips with the same address on the serial interface. It also supports eight-byte SMBus block writes.Communication with the MIC3003 is via an industry standard 2-wire SMBus serial interface. Nonvolatile memory is provided for serial ID, configuration, and separate OEM and user scratchpad spaces.

特性 Features

? Packaged in a ultra small (3mm x 3mm) 24-pin MLF??package
? Extended temperature range
? Alarms and warnings interrupt and TXFAULT masks
? Capability to support up to four devices on one SMBus
? APC or constant-current laser bias
? Turbo mode for APC loop start-up and shorter laser turn on time
? Supports multiple laser types and bias circuit topologies
? Integrated digital temperature sensor
? Temperature compensation of modulation, bias, bias fault and alarm thresholds via NVRAM look-up tables
? NVRAM to support GBIC/SFP serial ID function
? User writable EEPROM scratchpad
? Reset signal compatible with some new systems requirements
? Diagnostic monitoring interface per SFF-8472
? Monitors and reports critical parameters: temperature, bias current, TX and RX optical power, and supply voltage
? S/W control and monitoring of TXFAULT, RXLOS, RATESELECT, and TXDISABLE
? Internal or external calibration
? EEPOT for adjusting RX power measurement
? Power-on hour meter
? Interrupt capability
? Extensive test and calibration features
? 2-wire SMBus-compatible serial interface

簡介

MIC3003GFL屬于集成電路（IC）的激光驅動器。由制造生產的MIC3003GFL激光驅動器激光驅動器電源管理集成電路 (PMIC) 可用于提供一個或多個受控電流源，以從標稱恒定電壓電源為半導體激光器件供電。產品通常支持通過監控受驅動的激光器件發出的光功率而得到反饋，可廣泛應用于光通信系統中；并因具有對提供給用電設備的電流進行高頻調制的能力，而與執行類似功能的器件區分開來。