描述 Description

The MIC2950 and MIC2951 are \"bulletproof\" micropower voltage regulators with very low dropout voltage (typically 40mV at light loads and 250mV at 100mA) and very low quiescent currents. Like their predecessors, the LP2950 and LP2951, the quiescent current of the MIC2950/MIC2951 increases only slightly in dropout, thus prolonging battery life. The MIC2950/MIC2951 are pin-for-pin compatible with the LP2950/LP2951, but offer lower dropout, lower quiescent current, reverse battery protection, and automotive load dump protection.
The key additional features and protection offered include higher output current (150mA), positive transient protection for up to 60V (load dump), and the ability to survive an unregulated input voltage transient of -20V below ground (reverse battery).
The plastic DIP and SOIC versions offer additional system functions such as programmable output voltage and logic-controlled shutdown. The 3-pin TO-92 MIC2950 is pin-for-pin compatible with the older 5V regulators.
These system functions also include an error flag output that warns of a low output voltage, which is often due to failing batteries on the input. This may also be used as a power-on reset. A logic-compatible shutdown input is also available that enables the regulator to be switched on and off. This part may also be pin-strapped for a 5V output or programmed from 1.24V to 29V with the use of two external resistors.

特性 Features

·High accuracy: 3.3V, 4.85V, or 5V with guaranteed 150mA output
·Extremely low quiescent current
·Low-dropout voltage
·Extremely tight load and line regulation
·Very low temperature coefficient
·Use as regulator or reference
·Needs only 1.5μF for stability
·Current and thermal limiting
·Unregulated DC input can withstand -20V reverse battery and +60V positive transients
·Error flag warns of output dropout (MIC2951)
·Logic-controlled electronic shutdown (MIC2951)
·Output programmable from 1.24V to 29V (MIC2951)

簡介

MIC2950屬于集成電路（IC）的線性+開關穩壓器。由制造生產的MIC2950穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。