描述 Description

The MIC29710 and MIC29712 are high-current, high-accuracy, low-dropout voltage regulators featuring fast transient recovery from input voltage surges and output load current changes. These regulators use a PNP pass element that features proprietary Super βeta PNP? process.

The MIC29710/2 is available in two versions: the 3-pin fixed output MIC29710 and the 5-pin adjustable output voltage MIC29712. All versions are fully protected against overcurrent faults, reversed lead insertion, over-temperature operation, and positive and negative transient voltage spikes.

A TTL-compatible enable (EN) control pin supports external on/off control. If on/off control is not required, the device may be continuously enabled by connecting EN to IN.

The MIC29710/2 is available in the standard 3- and 5-pin TO-220 package with an operating junction temperature range of 0°C to +125°C.

For applications requiring even lower dropout voltage or input voltage greater than 16V, see the MIC29750/29752.

特性 Features

? Fast transient response
? 7.5A current capability
? 700mV dropout voltage at full load
? Low ground current
? Accurate 2% guaranteed tolerance
? Zero-current shutdown mode (MIC29712)
? No minimum load current
? Fixed voltage and adjustable versions

簡介

MIC29712屬于集成電路（IC）的特殊用途穩壓器。由制造生產的MIC29712特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。