最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

TPS3106

具有超低電源電流的雙通道電壓監(jiān)控器; ? Precision Supply Voltage Supervision Range: 0.9 V, 1.2 V, 1.5 V, 1.6 V, 2 V, and 3.3 V\n? High Trip-Point Accuracy: 0.75%\n? Supply Current of 1.2 μA (Typical)\n? RESET Defined With Input Voltages as Low as 0.4 V\n? Power-On Reset Generator With a Delay Time of 130 ms\n? Push/Pull or Open-Drain RESET Outputs\n? Package Temperature Range: –40°C to 125°C;

The TPS310x and TPS311x families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems.During power-on, RESET is asserted low when the supply voltage (VDD) becomes higher than 0.4 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output low as long as VDD remains below the threshold voltage (VIT–). To ensure proper system reset, after VDD surpasses the threshold voltage, an internal timer delays the transition of the RESET signal from low to high for the specified time. When VDD drops below VIT–, the output transitions low again.All the devices of this family have a fixed-sense threshold voltage (VIT–) set by an internal voltage divider.The TPS3103 and TPS3106 devices have an active-low, open-drain RESET output and either an integrated power-fail input (PFI) or SENSE input with corresponding outputs for monitoring other voltages. The TPS3110 has an active-low push/pull RESET and a watchdog timer to monitor the operation of microprocessors. All three devices have a manual reset pin that can be used to force the outputs low regardless of the sensed voltages. The product spectrum is designed for supply voltages of 0.9 V up to 3.6 V. The circuits are available in 6-pin SOT-23 packages. The TPS31xx family is characterized for operation over a temperature range of –40°C to 125°C.

TPS3106

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS

TPS3106

UltraLow Supply-Current/Supply-Voltage Supervisory Circuits

TPS3106-EP

增強(qiáng)型產(chǎn)品超低電源電流/電源電壓監(jiān)控電路; ? Controlled Baseline \n? One Assembly Site\n? One Test Site\n? One Fabrication Site\n \n? Extended Temperature Performance of -55°C to 125°C\n? Enhanced Diminishing Manufacturing Sources (DMS) Support\n? Enhanced Product-Change Notification\n? Qualification Pedigree\n? Precision Supply Voltage Supervision Range: 0.9 V, 1.2 V, 1.5 V, 1.6 V, 2 V, and 3.3 V\n? High Trip-Point Accuracy: 0.75%\n? Supply Current of 1.2 μA (Typ)\n? RESET Defined With Input Voltages as Low as 0.4 V\n? Power-On Reset Generator With a Delay Time of 130 ms\n? Push/Pull or Open-Drain RESET Outputs\n? SOT23-6 Package\n? APPLICATIONS \n? Applications Using Low-Power DSPs, Microcontrollers, or Microprocessors\n? Portable- and Battery-Powered Equipment\n? Intelligent Instruments\n? Wireless Communication Systems\n? Industrial Equipment\n? Notebook/Desktop Computers\n \n \n Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.;

The TPS310x and TPS311x families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems.During power-on, RESET is asserted when the supply voltage (VDD) becomes higher than 0.4 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output active as long as VDD remains below the threshold voltage (VIT). An internal timer delays the return of the output to the inactive state to ensure proper system reset. The delay time starts after VDD has risen above VIT. When VDD drops below VIT, the output becomes active again. All the devices of this family have a fixed-sense threshold voltage (VIT) set by an internal voltage divider. The TPS3103 and TPS3106 have an active-low, open-drain RESET output. The TPS3110 has an active-low push/pull RESET. The product spectrum is designed for supply voltages of 0.9 V up to 3.3 V. The circuits are available in SOT23-6 packages. The TPS31xx family is characterized for operation over a temperature range of -55°C to 125°C.

TPS310609DVB

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS

TPS310609DVBR

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS

TPS310612DVB

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS

TPS310612DVBR

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS

TPS310615DVB

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS

TPS310615DVBR

ULTRALOW SUPPLY CURRENT/SUPPLY VOLTAGE SUPERVISORY CIRCUITS