描述 Description

The SY89296U is a programmable delay line that delays the input signal using a digital control signal. The delay can vary from 3.2ns to 14.8ns in 10ps increments. Further, the delay may be varied continuously in about 40ps range by setting the voltage at the FTUNE pin. In addition, the input signal is LVPECL, uses either a 2.5V ±5% or 3.3V ±10% power supply, and is guaranteed over the full industrial temperature range (-40°C to +85°C).The delay varies in discrete steps based on a control word. The control word is 10-bits long and controls the delay in 10ps increments. The eleventh bit is D[10] and is used to simultaneously cascade the SY89296U for a larger delay range. In addition, the input pins IN and /IN default to an equivalent low state when left floating. Further, for maximum flexibility, the control register interface accepts CMOS or TTL level signals.For applications that do not require an analog delay input, see the SY89295U. The SY89295U and SY89296U are part of Micrel's high-speed, Precision Edge??product line.

特性 Features

·Precision LVPECL programmable delay time
·Guaranteed AC performance over temperature and voltage:·>1.5GHz fMAX
·<160ps rise/fall times

·Low jitter design:·<10psPP?total jitter
·<2psRMS?cycle-to-cycle jitter
·<1psRMS?random jitter

·Programmable delay range: 3.2ns to 14.8ns in 10ps increments
·Increased monotonicity over the MIC100EP195
·±10ps INL
·VBB?output reference voltage
·Parallel inputs accept LVPECL or CMOS/LVTTL
·40ps/V fine tune range
·Low voltage operation: 2.5V ±5% and 3.3V ±10%
·Industrial -40°C to +85°C temperature range
·Available in 32-pin (5mm x 5mm) MLF??package or 32-pin TQFP package

簡介

SY89296U屬于集成電路（IC）的延遲線。由制造生產的SY89296U延遲線時鐘延遲線產品族中的產品屬于數字器件，用于在數字信號中引入時間延遲，以便將提交給器件輸入的信號躍遷，經過某一已知時間之后在輸出端復現。它們常用于高速數字系統，以校正或補償不同信號路徑之間的信號傳播時間的偏差。這些器件可用于產生固定、可選或可變持續時間的延遲。