描述 Description

The 'ABT16240A devices are 16-bit buffers and line drivers designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. These devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. These devices provide inverting outputs and symmetrical active-low output-enable (OE\\) inputs. To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT16240A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16240A is characterized for operation from -40°C to 85°C.

特性 Features

? Members of the Texas Instruments WidebusTM Family
? State-of-the-Art EPIC-II BTM BiCMOS Design Significantly Reduces Power Dissipation
? Typical VOLP (Output Ground Bounce) CC = 5 V, TA = 25°C
? Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise
? Flow-Through Architecture Optimizes PCB Layout
? High-Drive Outputs (-32-mA IOH, 64-mA IOL)
? Latch-Up Performance Exceeds 500 mA Per JESD 17
? ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
? Package Options Include Plastic Shrink Small-Outline (DL), Thin Shrink Small-Outline (DGG), and Thin Very Small-Outline (DGV) Packages and 380-mil Fine-Pitch Ceramic Flat (WD) Package Using 25-mil Center-to-Center Spacings
Widebus and EPIC-IIB are trademarks of Texas Instruments Incorporated.