描述 Description

The ?ABT162245 devices are 16-bit noninverting 3-state transceivers designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
These devices can be used as two 8-bit transceivers or one 16-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\\ input can be used to disable the device so that the buses effectively are isolated.
The A-port outputs, which are designed to source or sink up to 12 mA, include equivalent 25- series resistors to reduce overshoot and undershoot.
These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down.
To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

特性 Features

? Members of the Texas Instruments Widebus? Family
? A-Port Outputs Have Equivalent 25- Series Resistors, So No External Resistors Are Required
? Typical VOLP (Output Ground Bounce) CC = 5 V, TA = 25°C
? Distributed VCC and GND Pins Minimize High-Speed Switching Noise
? Ioff Supports Partial-Power-Down Mode Operation
? Flow-Through Architecture Optimizes PCB Layout
? Latch-Up Performance Exceeds 500 mA Per JESD 17
? ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A)
Widebus is a trademark of Texas Instruments.