描述 Description

The SN65LVDS302 receiver de-serializes FlatLink?3G compliant serial input data to 27 parallel data outputs. The SN65LVDS302 receiver contains one shift register to load 30 bits from 1, 2 or 3 serial inputs and latches the 24 pixel bits and 3 control bits out to the parallel CMOS outputs after checking the parity bit. If the parity check confirms correct parity, the Channel Parity Error (CPE) output remains low. If a parity error is detected, the CPE output generates a high pulse while the data output bus disregards the newly-received pixel. Instead, the last data word is held on the output bus for another clock cycle.

特性 Features

? Serial interface technology
? Compatible with FlatLink?3G such as SN65LVDS301
? Supports video interfaces up to 24-bit RGB data and 3 control bits received over 1, 2 or 3 SubLVDS differential lines
? SubLVDS differential voltage levels
? Up to 1.755-Gbps Data Throughput
? Three operating modes to conserve power
? Active mode QVGA: 17 mW
? Typical shutdown: 0.7 μW
? Typical standby mode: 27 μW Typical

? Bus-swap function for PCB-layout flexibility
? ESD rating > 4 kV (HBM)
? Pixel clock range of 4 MHz to 65 MHz
? Failsafe on all CMOS inputs
? Packaged in 5-mm × 5-mm nFBGA with 0.5-mm ball pitch
? Very low EMI meets SAE J1752/3 ’Kh’-spec