描述 Description

The PM4329 HDLIU-32 features 32 short-haul T1 or E1 LIUs in a single device. The HDLIU-32 delivers unprecedented 32-channel T1/E1/J1 port density and is optimized for multi-service provisioning platforms (MSPPs), add/drop multiplexers (ADMs), wireless infrastructure, multi-service switches and edge routers. Traditional solutions rely on interconnecting the various semiconductor components with clock and data signals. Using the traditional approach to address these higher port count requirements quickly becomes cost prohibitive and requires more complexity for equipment designers as chip pin count and power consumption increase. To address this problem, the HDLIU-32 device supports a low trace count, high-density, industry standard Scalable Bandwidth Interconnect (SBI) bus. In addition, for transport applications, the device supports a variant of this interface referred to as the Scalable Bandwidth Interconnect Transport (SBI TR) bus. This technology enables Microchip to offer the lowest cost T1/E1/J1 mapper/framer/LIU solution in the industry.

The HDLIU-32 has a 7-watt typical power dissipation, provides a -40 to +85c industrial temperature operating range and is packaged in a single 27mm x 27mm L2BGA package.

Applications
? Voice Gateway
? 84 T1 Lines / 63 E1 Lines
? Integrated SONET/SDH ADM

特性 Features

Monolithic device that integrates 32 T1/J1/E1 shorthaul line interface circuits
Software selectable between E1 and T1 mode, in groups of 16 links
Links 1-16 and 17-32 can be configured for either T1 or E1 mode
Meets or exceeds T1/J1 and E1 shorthaul network access specifications including ANSI T1.102, T1.403, T1.408, AT&T TR 62411, ITUT G.703, G.704 as well as ETSI 300- 011, CTR-4, CTR-12, and CTR-13
Provides encoding and decoding of B8ZS, HDB3, and AMI line codes
Provides per receiver, clock recovery, and line performance monitoring
Provides transmit and receive jitter attenuation
Provides support for redundancy
Provides a digitally programmable Shorthaul pulse template per transmitter
Provides a selectable, per channel independent de-jittered T1 or E1 recovered clock for system timing and redundancy
Provides PRBS generators and detectors on each tributary for error testing at DS1 and E1 rates as recommended in ITU-T O.151
Provides an 8-bit microprocessor bus interface for configuration, control, and status monitoring
Provides line and digital loopback modes
Supports programmable inband loopback codes
Uses line rate system clock
Provides an IEEE 1149.1 (JTAG) compliant test access port (TAP) and controller for boundary scan test
Supports the following system interfaces:
? High-density SBI bus interface
? High-density, low latency, SBI TR bus interface

簡介

PM4329屬于集成電路（IC）的電信。由制造生產的PM4329電信電信接口集成電路 (IC) 為通信網絡接口提供特定功能和控制，例如以太網切換、線路驅動器、ISDN、放大器、通道擴展器、數字鎖相環、DTMF、音頻發生器和解碼器、回聲消除、檢測器和發生器、DDA、電話線路監控器和主叫號碼標識。