描述 Description

The NCP1255 is a highly integrated PWM controller capable of delivering a rugged and high performance offline power supply in a SOIC-8 package. With a supply range up to 35 V, the controller hosts a jittered 65-kHz switching circuitry operated in peak current mode control. When the power on the secondary side starts to decrease, the controller automatically folds back its switching frequency down to a minimum level of 26 kHz. As the power further goes down, the part enters skip cycle while freezing the peak current setpoint. To help build rugged converters, the controller features several key protective features: a brown-out, a non-dissipative Over Power Protection for a constant maximum output current regardless of the input voltage, two latched over voltage protection inputs 0 either through a dedicated pin or via the Vcc input - and finally, the possibility to externally adjust an auto-recovery timer duration. The controller architecture is arranged to authorize a transient peak power excursion when the peak current hits the limit. At this point, the switching frequency is increased from 65 kHz to 130 kHz until the peak requirement disappears. The timer duration is then modulated as the converter crosses a peak power excursion mode (long) or undergoes a short circuit (short).

特性 Features

65kHz operating frequency with 130kHz Frequency Excursion
Allows for a high peak power delivery without increasing the transformer size
Internal and Adjustable Over Power Protection (OPP) Circuit
Compensates peak current for changing line conditions
Adjustable Brown-Out Protection
Protects against drops in AC line input voltage
Frequency Foldback down to 26 kHz and Skip-cycle in light load conditions
Optimized efficiency across the entire power range
Adjustable Timer-based Auto-recovery Overload/Short-circuit protection with 100% to 25% timer reduction for short-circuit faults
Robust protection against both overload and short circuit conditions
Frequency Jittering in Normal and Frequency Foldback Modes
Softened EMI signature
Latch Input
Flexible input can be used for OVP or OTP protection
Double Vcc hiccup in fault mode
Reduced average power during fault mode

應用 Application

Ac-Dc Adapters
Notebook AdaptersPrinter Power Supplies

簡介

NCP1255屬于集成電路（IC）的ACDC轉換器離線開關。由制造生產的NCP1255AC DC 轉換器，離線開關該系列是元器件級控制產品，用于構建將交流市電轉換為直流電（通常電壓大幅降低）的設備。集成和未集成系統主要開關元件的器件均包括在內。由于高輸入輸出電壓比，以及此類系統中通常需要隔離，這些器件通常與外部變壓器配合使用。盡管通常使用定制變壓器來實現此用途，但也有許多專門用于此用途的庫存產品，請參見“開關轉換器，SMPS 變壓器”標題。