描述 Description

The NCP1230 represents a major leap towards achieving low standby power in medium-to-high power Switched-Mode Power Supplies such as notebook adapters, off-line battery chargers and consumer electronics equipment. Housed in a compact 8-pin package (SO-8 or PDIP-7), the NCP1230 contains all needed control functionality to build a rugged and efficient power supply. The NCP1230 is a current mode controller with internal ramp compensation. Among the unique features offered by the NCP1230 is an event management scheme that can disable the front-end PFC circuit during standby, thus reducing the no load power consumption.The NCP1230 itself goes into cycle skipping at light loads while limiting peak current (to 25% of nominal peak) so that no acoustic noise is generated. The NCP1230 has a high-voltage start-up circuit that eliminates external components and reduces power consumption. The NCP1230 also features an internal latching function that can be used for OVP protection. This latch is triggered by pulling the CS pin above 3.0 V and can only be reset by pulling VCC to ground. True overload protection, internal 2.5 ms soft start, internal leading edge blanking, internal frequency dithering for low EMI are some of the other important features offered by the NCP1230.

特性 Features

Current?Mode Operation with Internal Ramp Compensation
Internal High?Voltage Start?Up Current Source for Loss Less Start?Up
Extremely Low No?Load Standby Power
Skip?Cycle Capability at Low Peak Currents
Direct Connection to PFC Controller for Improved No?Load Standby Power
Internal 2.5 ms Soft Start
Internal Leading Edge Blanking
Latched Primary Overcurrent and Overvoltage Protection
Short?Circuit Protection Independent of Auxiliary Level
Internal Frequency Jittering for Improved EMI Signature
+500 mA/?800 mA Peak Current Drive Capability
Available in Three Frequency Options: 65 kHz, 100 kHz, and 133 kHz
Direct Optocoupler Connection
SPICE Models Available for TRANsient and AC Analysis
Pb-Free Packages are Available

應用 Application

High Power AC/DC Adapters for Notebooks, etc.Offline Battery ChargersFlat TVs, DVD RW, Home Theatre, Set Top Boxes

簡介

NCP1230屬于集成電路（IC）的ACDC轉換器離線開關。由制造生產的NCP1230AC DC 轉換器，離線開關該系列是元器件級控制產品，用于構建將交流市電轉換為直流電（通常電壓大幅降低）的設備。集成和未集成系統主要開關元件的器件均包括在內。由于高輸入輸出電壓比，以及此類系統中通常需要隔離，這些器件通常與外部變壓器配合使用。盡管通常使用定制變壓器來實現此用途，但也有許多專門用于此用途的庫存產品，請參見“開關轉換器，SMPS 變壓器”標題。