描述 Description

The MIC2774 is a dual power supply supervisor that provides under-voltage monitoring, manual reset capability, and power-on reset generation in a compact 5-pin SOT package.Features include two under-voltage detectors, one fixed and one adjustable, and a choice of reset outputs. One undervoltage detector compares VDD against a fixed threshold. Ten factory-programmed thresholds are available. The second, user-adjustable input is compared against a 300mV reference.This low reference voltage allows monitoring voltages lower than those supported by previous supervisor ICs.The reset outputs are asserted at power-on and any time either voltage drops below the programmed threshold voltages and remains asserted for 140ms (min.) after they subsequently rise back above the threshold boundaries.Manual reset functionality can be provided by a switch connected between ground and the /MR input. A wide choice of voltage thresholds provides for a variety of supply voltages and tolerances. Hysteresis is included to prevent chattering due to noise. Typical supply current is a low 3.5μA.

特性 Features

? Monitors two independent power supplies for under-voltage conditions
? One fixed and one user adjustable input
? Choice of factory-programmed thresholds
? Adjustable input can monitor supplies as low as 0.3V
? Generates 140ms (minimum) power-on reset pulse
? Manual reset input
? Choice of active-high, active-low, or open-drain activelow reset outputs
? Inputs may be pulled above VDD(7V abs. max.)
? Open-drain output can be pulled above VDD?(7V abs max.)
? /RST output valid down to 1.2V
? Ultra-low supply current, 3.5μA typical
? Rejects brief input transients
? IttyBitty??5-lead SOT-23 package
? Pin compatible upgrade for MAX6306/09/12

簡介

MIC2774屬于集成電路（IC）的監控器。由制造生產的MIC2774監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。