描述 Description

The MIC2591B is a dual-slot power controller supporting the power distribution requirements for Peripheral Component Interconnect Express (PCI Express?) Hot-Plug compliant systems incorporating the Intelligent Platform Management Interface (IPMI) Specifi cation v1.0. The MIC2591B provides complete power control support for two PCI Express slots, including the 3.3VAUX defined by the PCI Express standards. Support for 12V, 3.3V, and 3.3VAUX supplies is provided including programmable constant-current inrush limiting, voltage supervision, programmable current limit, and circuit breaker functions. These features provide comprehensive system protection and fault isolation. The MIC2591B also incorporates an SMBus interface via which complete status of each slot is provided. Data such as voltage and current from each supply of each slot can be obtained for IPMI sensor records in addition to the power status of each slot.

特性 Features

? Supports two independent PCI Express slots
? SMBus interface for slot power control and status
? Voltage-tolerant I/O for compatibility with SMBus 2.0 systems
? Intergrated power MOSFETs for 3.3VAUX?rails
? Standby operation for Wake-on-LAN applications with low backfeed on Main +12V and +3.3V rails.
? Integral analog multiplexer and 8-bit ??ADC
? Compliant to the Intelligent Platform Management Interface (IPMI) Specifi cation v1.0
? Conversion results available via an SMBus interface
? Programmable inrush current limiting
? Active current regulation controls inrush current
? Electronic circuit breaker for each supply to each slot
? High accuracies for both circuit breaker trip points and nuisance trip prevention timers
? Dual level fault detection for quick fault response without nuisance tripping
? Thermal isolation between circuitry for Slot A and Slot B
? Two General Purpose Input pins suitable for interface to logic and switches.

簡介

MIC2591B屬于集成電路（IC）的熱插拔控制器。由制造生產的MIC2591B熱插拔控制器PMIC - 熱插拔控制器是能提供電路內保護和控制功能的半導體，可允許帶電情況下在電路中插入或拔除其他組件。熱插拔控制器可用于計算機網絡和通用電源系統，主要根據輸出電流、受控通道數量等特性，以及自動重試、故障超時和保護等特殊功能進行區分。