描述 Description

The MCP3426 is a two channel low-noise, high accuracy delta-sigma A/D converter with differential inputs and up to 16 bits of resolution. The on-board precision 2.048V reference voltage enables an input range of ±2.048V differentially. The device uses a two-wire I2C? compatible serial interface and operates from a single power supply ranging from 2.7V to 5.5V. The MCP3426 device performs conversions at rates of 15, 60 or 240 samples per second depending on user controllable configuration bit settings using the two-wire I2C?Compatible Compatible compatible serial interface. This device has an onboard programmable gain amplifier (PGA). User can select the PGA gain of x1, x2, x4, or x8 before the analog-to-digital conversion takes place. This allows the MCP3426 device to convert a smaller input signal with high resolution. The device has two conversion modes: (a) Continuous mode and (b) One-Shot mode. In One-Shot mode, the device enters a low current standby mode automatically after one conversion. This reduces current consumption greatly during idle periods. The MCP3426 device can be used for various high accuracy analog-to-digital data conversion applications where ease of use, low power consumption and small footprint are major considerations.

特性 Features

16-bit resolution
2-channel differential input operation
Differential input operation
On-board voltage reference with 15 ppm/°C drift
On-board PGA, gains of 1, 2, 4, 8
15 SPS (16 bits)
60 SPS (14 bits)
240 SPS (12 bits)
INL 10 ppm of FSR max
Low current consumption, 135 μA at 3V
One-shot or continuous conversion options
Supports I2C? serial interface
Extended temperature range: -40°C to +125°C

簡介

MCP3426屬于集成電路（IC）的模數轉換器（ADC）。由制造生產的MCP3426模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。