描述 Description

The MCP3021 is a successive approximation A/D converter with 10-bit resolution. Available in the SOT-23 package, this device provides one, single-ended input with very low power consumption. The MCP3021 provides a low maximum conversion current and standby current of 250 μA and 1 μA respectively. Low current consumption combined with the small SOT-23 package make this device ideal for battery powered and remote data acquisition applications. Communication to the MCP3021 is performed using a 2-wire I2C?Compatible compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C?Compatible modes are available with the device. An on-chip conversion clock enables independent timing for the I2C?Compatible clock and the conversion clock. The device is also addressable allowing up to eight devices on a single 2-wire bus. The MCP3021 runs on a single supply voltage that operates over a broad range of 2.7 V to 5.5 V. This device also provides excellent linearity of ±1 LSB differential non-linearity and ±1 LSB integral non-linearity. Operating temperature range for this device is -40°C to +125°C.

特性 Features

?10-bit resolution
?single-ended input
? I2C? Compatible serial interface
?Multiple address options
?±1 LSB DNL
?±1 LSB INL
?22.3 ksps sample rate at 5V
?-40 to +125°C temperature range
? Small SOT-23 packaging
? AEC-Q100 Grade 1

簡介

MCP3021屬于集成電路（IC）的模數轉換器（ADC）。由制造生產的MCP3021模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。