General Description

The ICS9179B-01 generates SDRAM clock buffers required for high speed RISC or CISC microprocessor systems such as Intel PentiumPro or Pentium II. An output enable is provided for testability.

The device is a buffer with low output to output skew. This is a Fanout buffer device, not using an internal PLL. This buffer can also be a feedback to an external PLL stage for phase synchronization to a master clock.

The individual clock outputs are addressable through I2C to be enabled, or stopped in a low state for reduced EMI when the lines are not needed.

特性 Features

? High speed, low noise non-inverting (0:17) buffer for SDRAM clock buffer applications.

? Supports up to four SDRAM DIMMS

? Synchronous clocks skew matched to 250ps window on SDRAM.

? I2C Serial Configuration interface to allow individual clocks to be stopped.

? Multiple VDD, VSS pins for noise reduction

? Tri-state pin for testing

? Custom configurations available

? 3.0V - 3.7V supply range

? 48-pin SSOP package