描述 Description

The GPR25L6404F(64M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s.

特性 Features

◆64M-bit Serial Flash-8192K-byte-256 bytes per programmable page◆Standard, Dual, Quad SPI-Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#-Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3◆High Speed Clock Frequency-120MHz for fast read with 30PF load-Dual I/O Data transfer up to 240Mbits/s-Quad I/O Data transfer up to 480Mbits/s-Continuous Read With 8/16/32/64-byte Wrap◆Software/Hardware Write Protection-Write protect all/portion of memory via software-Enable/Disable protection with WP# Pin-Top/Bottom Block protection◆Minimum 100,000 Program/Erase Cycles◆Allows XIP(execute in place)operation◆Data retention-20-year data retention typical◆Fast Program/Erase Speed-Page Program time: 0.7ms typical-Sector Erase time: 100ms typical-Block Erase time: 0.3/0.5s typical-Chip Erase time: 60s typical◆Flexible Architecture-Uniform Sector of 4K-byte-Uniform Block of 32/64K-byte◆Low Power Consumption-25mA maximum active current-5uA maximum power down current◆Advanced Security Features
-3*1024-Byte Security Registers With OTP Locks-Discoverable parameters(SFDP) register◆Single Power Supply Voltage-Full voltage range:2.7~3.6V◆Package Information-SOP8 (208mil)