描述 Description

The GPR25L12806F(128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#/ RESET#). The Dual I/O data is transferred with speed of 208Mbits/s and the Quad I/O & Quad output data is transferred with speed of 416Mbits/s.

特性 Features

? 128M-bit Serial Flash

-16384K-byte

-256 bytes per programmable page

? Standard, Dual, Quad SPI

-Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#/ RESET#

-Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#/ RESET#

-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3

? High Speed Clock Frequency

-104MHz for Standard and Dual SPI fast read with 30PF load

-Dual I/O Data transfer up to 208Mbits/s

-Quad I/O Data transfer up to 416Mbits/s

? Software/Hardware Write Protection

-Write protect all/portion of memory via software

-Enable/Disable protection with WP# Pin

-Top/Bottom Block protection

? Allows XIP (execute in place) Operation

-Continuous Read With 8/16/32/64-byte Wrap

? Minimum 100,000 Program/Erase Cycles

? Data Retention

-20-year data retention typical

? Fast Program/Erase Speed

-Page Program time: 0.6ms typical

-Sector Erase time: 50ms typical

-Block Erase time: 0.2/0.3s typical

-Chip Erase time: 60s typical

? Flexible Architecture

-Uniform Sector of 4K-byte

-Uniform Block of 32/64k-byte

? Low Power Consumption

-25mA maximum active current

-5uA maximum power down current

? Advanced Security Features

-3x1024-Byte Security Registers With OTP Locks

? Single Power Supply Voltage

-Full voltage range:2.7~3.6V

? Package Information

-SOP8 (208mil)