描述 Description

The ZSPM9010 DrMOS is a fully optimized, ultra-compact, integrated MOSFET plus driver power stage solution for high-current, high-frequency, synchronous buck DC-DC applications. The ZSPM9010 incorporates a driver IC, two power MOSFETs, and a bootstrap Schottky diode in a thermally enhanced, ultra-compact PQFN40 package (6mmx6mm). With an integrated approach, the ZSPM9010's complete switching power stage is optimized for driver and MOSFET dynamic performance, system inductance, and power MOSFET RDS(ON). It uses innovative high-performance MOSFET technology, which dramatically reduces switch ringing, eliminating the snubber circuit in most buck converter applications. An innovative driver IC with reduced dead times and propagation delays further enhances performance. A thermal warning function (THWN) warns of potential over-temperature situations. The ZSPM9010 also incorporates features such as Skip Mode (SMOD) for improved light-load efficiency with a tri-state 3.3V pulse-width modulation (PWM) input for compatibility with a wide range of PWM controllers. The ZSPM9010 DrMOS is compatible with IDT's ZSPM1000, a leading-edge configurable digital power-management system controller for non-isolated point-of-load (POL) supplies.

特性 Features

Based on the Intel? 4.0 DrMOS standard
High-current handling: up to 50A
High-performance copper-clip package
Tri-state 3.3V PWM input driver
Skip Mode (low-side gate turn-off) input (SMOD#)
Warning flag for over-temperature conditions
Driver output disable function (DISB# pin)
Internal pull-up and pull-down for SMOD# and DISB# inputs, respectively
Integrated Schottky diode technology in the low-side MOSFET
Integrated bootstrap Schottky diode
Adaptive gate drive timing for shoot-through protection
Under-voltage lockout (UVLO)
Optimized for switching frequencies up to 1MHz