1 Features

? ADC channel

– Stereo high performance ADC

– Performance:

? Line differential input dynamic range: 100dB

? Mic differential input dynamic range: 100dB

? THD+N: –95dB

? Channel summing mode supports high SNR

– Input voltage:

? Differential, 2VRMS full-scale inputs

? Single-ended, 1VRMS full-scale inputs

– Input mix / mux options

– Sample rate (fS) = 8kHz to 768kHz

– Programmable microphone bias (Up to 3V)

? DAC channel

– Stereo high performance DAC

– DAC performance:

? DAC to line out dynamic range: 106dB

? DAC to HP out dynamic range: 106dB

? THD+N: –95 dB

– Head phone / line Out output voltage:

? Differential, 2VRMS full-scale

? Single-ended, 1VRMS full-scale

– DAC sample Rates (fs) = 8KHz to 768KHz

? Common features

– Up to 4 record channels

? 2 Channel analog + 2 channel digital

? 1 Channel analog + 3 channel digital

? 4 Channel digital

– Analog input to output by-pass

– Voice activity detection

– Battery protection

– Signal distortion limiter

– Thermal foldback

– Low latency filter selection

– Programmable HPF and biquad filters

– I2C & SPI control interface

– Audio serial interface

? Format: TDM, I2S or left justified

? Word length: 16,20,24 or 32 bits

– Programmable PLL for flexible clocking

– Low power modes

? TBD mW for playback

? TBD mW for record

– Single supply operation: 1.8V or 3.3V

– I/O supply operation: 1.2V or 1.8V or 3.3V

– Temperature grade 1: –40°C ≤ TA ≤ +125°C

2 Applications

? Land Mobile Radio

? IP Network Camera

? IP Telephone

? Video Conference System

? Professional audio mixer/control surface

3 Description

The TAC5112-Q1 is a low power Stereo Codec with

2VRMS differential Input, 100dB Stereo ADC and

2VRMS Stereo DAC. The TAC5112-Q1 supports both

differential and Single-ended input and output. The

device supports both Microphone and Line In input on

the ADC Channel. DAC Output can be configured for

either Line Out or Head Phone Load. TAC5112-Q1

can drive up to 62.5mW into a Headphone Load.

The TAC5112-Q1 integrates programable channel

gain, digital volume control, a low-jitter phase-locked

loop (PLL), a programmable high-pass filter (HPF),

programmable EQ and biquad filters, low-latency filter

modes, and allows for sample rates up to 768kHz.

The TAC5112-Q1 supports time-division multiplexing

(TDM), I2S, or left-justified (LJ) audio formats, and

can be controlled with I2C or SPI. These integrated

high-performance features, along with a single supply

operation, makes TAC5112-Q1 an excellent choice for

space-constrained audio applications.