最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

WT6573SF

視訊IC; \n●8-bit Turbo 8052 compatible CPU with 24MHz operating frequency\n●12MHz or 24MHz crystal oscillator (selectable by S/W)\n●32kHz RC Ring Clock for off line and low power mode\n●16K bytes Flash ROM including EEPROM emulation\n?- All pages of Flash ROM could be used (by page) as data storage\n?- Each page is 512-byte\n●512 bytes SRAM\n●USB features:\n?- Complete compatible with Universal Serial Bus specification 2.0 Full / Low Speed\n?- 1 control endpoint, IN/OUT each with 64 Bytes (8/16/32/64-byte programmable) FIFO\n?- 3 Generic endpoints (IN/OUT INT/Bulk programmable) each with 64-Byte (8/16/32/64 bytes programmable) FIFO; Endpoint 3 can also be configured as OUT token for endpoint 1 or 2\n?- Supports USB Suspend, Resume and Remote Wakeup\n●19-channel 12-bit ADC with external reference voltage input\n●2-ch 8-bit PWM output\n●Idle and power down modes supported\n●Standard RS232 data transmission: up to 230400bps\n●1 SPI interface\n?- Master/Slave mode selectable\n?- Max speed: 6MHz\n?- Data length per transaction: 1-byte\n●45(max.) GPIO pins for chip form and LQFP64; 37(max.) GPIO pins for LQFP48; 29(max.) GPIO pins for QFN40; 21(max.) GPIO pins for QFN32\n●USB-related circuit and V33 voltage regulator can be disabled for portable applications which are powered by battery (VBAT <= 3.6V)\n●16 high sink current IO for LED control: Port A and Port E\n●IO falling edge detect interrupt : Port A\n?? Remote-wake-up interrupt can work as wakeup trigger at the power down mode: Port A-C\n●Three 16-bit timer/counter\n●Watch-dog timer (10ms ~ 640ms programmable)\n●ISP function by 6-pin I2C (VDD5V, VSS, OSCI, RESETN, SCL, SDA pins) or USB interface\n●On-chip ICE\n●Operating voltage:\n?- Whole system (except USB and regulator) working voltage: 2.4V ~ 3.6V (from VBAT pin)\n?- USB and regulator working voltage: 4.0 ~ 5.25V (from VDD5V pin)\n?- Please refer to Chapter 6 (Application Circuits) for versatile applications\n●LQFP64(7x7), LQFP48(7x7), QFN32(5x5) and Chip form\n;

\nWT6573SF is a USB full speed / low speed device controller with Turbo 8052 CPU, 16K-byte Flash ROM, 512-byte SRAM, 19-channel 12-bit ADC, 2-channel 8-bit PWM, standard RS232 interface, SPI master/slave interface, In-System-Programming (ISP) function by USB or I2C interface, and on-chip ICE.WT6573SF is suitable for the USB peripheral applications, such as: PS3 game pad/joystick, USB game controller, USB MIDI keyboard, USB touch-pad, or any USB devices with ADC applications.When USB-related circuit and V33 regulator are disabled, WT6573SF could be used for portable applications which are powered by battery (VBAT <= 3.6V).\n

6573A

AlligatorClipWithBoot

AN6573

SingleOperationalAmplifiers

SingleOperationalAmplifiers

BH6573FV

PWMdriverforCD

BX6573

RFAMPLIFIERMODEL

DAC6573

QUAD,10-Bit,LOW-POWER,VOLTAGEOUTPUT,I2CINTERFACEDIGITALTOANALOGCONVERTER

DAC6573

QUAD,10-Bit,LOW-POWER,VOLTAGEOUTPUT,INTERFACEDIGITAL-TO-ANALOGCONVERTER

DAC6573

Thisdocumentcontainsthefollowingchapters

DAC6573IPW

QUAD,10-Bit,LOW-POWER,VOLTAGEOUTPUT,INTERFACEDIGITAL-TO-ANALOGCONVERTER

DAC6573IPW

Thisdocumentcontainsthefollowingchapters