GENERAL DESCRIPTION

The W91560N series are tone/pulse switchable telephone dialers with three memories, keytone or lock, and handfree dialing control. These chips are fabricated using Winbonds high-performance CMOS technology and thus offer good performance in low-voltage, low-power operations.

FEATURES

? DTMF/pulse switchable dialer

? Two by 32 digit redial and save memory

? Three by 16 digit one-touch direct repertory memory

? Pulse-to-tone (*/T) keypad for long distance call operation

? Cascaded dialing

? Uses 5 ′ 5 keyboard

? Easy operation with redial, flash, pause, and */T keypads

? Pause, P?T (pulse-to-tone) can be stored as a digit in memory

? On-hook debounce time: 150 mS (Unlock Mode), 200 mS (Lock Mode)

? 0 or 9 dialing inhibition pin for PABX system or long distance dialing lock out

? Dialing rate (10 ppS or 20 ppS) selectable by bonding option

? Minimum tone output duration: 93 mS

? Minimum intertone pause: 93 mS

? Pause time: 3.6 sec.

? 300 mS off-hook delay in lock mode (DP remains low for 300 mS while off hook)

? Flash break time (73 mS, 100 mS, 300 mS, or 600 mS) selectable by keypad; pause time is 1.0S

? Make/break ratio (40:60 or 33.3:66.7) selectable by MODE pin

? Key tone output for valid keypad entry recognition

? On-chip power-on reset

? Uses 3.579545 MHz crystal or ceramic resonator

? 18 or 20-pin dual-in-line plastic package