GENERAL DESCRIPTION

The W49F102 is a 1-megabit, 5-volt only CMOS flash memory organized as 64K ′ 16 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W49F102 results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.

FEATURES

· Single 5-volt operations:

- 5-volt Read

- 5-volt Erase

- 5-volt Program

· Fast Program operation:

- Word-by-Word programming: 50 mS (max.)

· Fast Erase operation: 100 mS (typ.)

· Fast Read access time: 40/45 nS

· Endurance: 10K cycles (typ.)

· Ten-year data retention

· Hardware data protection

· 8K word Boot Block with Lockout protection

· Low power consumption

- Active current: 25 mA (typ.)

- Standby current: 20 mA (typ.)

· Automatic program and erase timing with internal VPP generation

· End of program or erase detection

- Toggle bit

- Data polling

· Latched address and data

· TTL compatible I/O

· JEDEC standard word-wide pinouts

· Available packages: 40-pin TSOP and 44-pin PLCC