VI-RAM-E1屬于電源-外部/內部（板外）的ACDC轉換器。由Vicor Corporation制造生產的VI-RAM-E1AC DC 轉換器AC-DC 轉換器將交流輸入電壓（10 V 至 766 VAC）轉換為直流輸出電壓（-54.5 V 至 400 VDC）。AC-DC 轉換器可以安裝在電路板之上或之外。板外電源提供 1 至 10 路輸出，而板載電源則提供 1 至 3 路輸出。輸出電流范圍為 10 mA 至 1000 A，額定功率為 1 W 至 10,080 W。

Product Highlights

Ripple attenuator modules may be connected to VI-200 or VI-J00 converters, FlatPACs, MegaPACs, MasterModules or MegaModules, with output voltages from 5 to 50V, to limit output noise to less than 3mV peak-to-peak at loads up to 20A. Combining active and passive filtering, the VI-RAM attenuates both low frequency input power source fundamental and harmonics, and high frequency switching components in the frequency range of DC to 20 MHz, while exhibiting efficiencies of 93-99. No adjustments are required, and remote sense and output voltage trim features are retained.

特性 Features

■ Reduces Output Ripple to <3 mV pp

■ Compatible with any VI-200/VI-J00-based Product: 5 to 50Vdc Output

■ Full Attenuation Up to 20A

■ No Adjustments Required

■ 93-99 Efficiency

■ Converter Sense, Trim, Overvoltage and Overcurrent Retained

■ Size: 2.28 x 2.4 x 0.5 (57,9 x 61,0 x 12,7)

■ CE Marked