描述 Description

Microchip’s USB5916 SmartHub is a 6 port, SuperSpeed (SS)/Hi-Speed (HS), low power, configurable and fully compliant with the USB 3.1 Gen1?specification. The USB5916 also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.A SmartHub is defined as a USB hub that integrates system levels functions typically associated with a separate MCU or processor.? The USB5916 SmartHub enables communication to other peripherals in addition to USB. This I/O Bridging capability allows the host to seamlessly interface to peripherals via I2C, SPI or GPIOs over USB.? The USB5916 also enable a downstream device to take control of the host system by swapping roles and becoming the host port. The USB5916 can also switch between two different hosts if required. This role changing technology is called FlexConnect and can be initiated through hardware or software commands.
New technologies like the USB Type-C connector and power delivery are changing the USB landscape. Designed to simplify the latest USB hub designs, the USB5916 enables a direct USB Type-C connection on the upstream and one downstream port through an integrated 2:1 multiplexer which support the reversible connection feature of the USB Type-C connector.? The USB5916 also has built in Billboard support giving you the option to offload this function from the power delivery controller onto the hub. In addition, the hub can expand beyond six ports through PortSplitting which allows for embedded applications to only use the interface needed for internal USB connections.
ProTouch2, Microchip’s proprietary software utility, can be used to program On-chip One Time Programmable (OTP) ROM for the USB5916 which stores required register settings to ensure the desired start up configuration at power on. All LED, GPIOs and port control signal pins are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5916 can be configured through a series of external low-cost resistor bootstraps. A handful of bootstap pins are available on the USB5916 to enable standard configurations for GPIOs and downstream ports. No OTP programming required..
*The?USBCheck online design review service is subject to?Microchip's Program Terms and Conditions and requires a myMicrochip?account.

特性 Features

Highlights·Six downstream USB3.1 Gen1/2.0 ports w/ support for a single USB Type-C upstream and downstream port
·Integrated Hub Feature Controller (HFC) enabling I/O Bridging and FlexConnect
·I/O Bridging: Host communication to external peripherals·USB to I2C/SPI/GPIO bridge endpoint support

·FlexConnect: Host port Swapping and Switching to downstream Devices·Reversible upstream and downstream Port 1 roles on command

·Integrated Billboard class device for Power Delivery notification support
·PortSplitting - USB downstream port can be split for custom applications using embedded USB3 devices in parallel with USB2.0 devices.
·Battery Charging - USB-IF rev1.2 support on downstream ports (DCP, CDP, SDP) including legacy Apple? iOS, Blackberry?, China Charging and many others
·Port Config Straps - Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
·USB Link Power Management (LPM) support
·IETF RFC 4122 compliant 128-bit UUID
·Compatible with MSFT Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers
·Available in 100-pin (12mm x 12mm) VQFN RoHS compliant package
·Industrial grade temperature support (?40°C to +85°C)
·Automotive quality and PPAP support
?Target Applications·Expansion Hubs
·Docking Stations
·LCD Monitors
·HDTVs

簡介

USB5916屬于集成電路（IC）的控制器。由制造生產的USB5916控制器該系列產品主要用于在采用不同通信協議和/或信令方法的端點之間提供信息連接。示例包括將 I2C 總線連接到 UART，將 USB 連接到 I2C、SPI、以太網或 UART、以太網 MAC 和 PHY 等的器件。此外，還包括用于通過為點對點通信設計的接口建立多路連接的器件，例如 USB 集線器控制器。