描述 Description

The μPD72012 is a dedicated LSI for a HUB connected to a universal serial bus (USB) system. It is an upgrade of NEC’s μPD72011. It complies with USB specification revision 1.1. By putting descriptors into ROM, information such as a user’s vendor ID can be implemented in the chip.FEATURES
? Compliant with Chapter 11 (HUB Specifications) of USB Specification 1.1.
??Descriptors into ROM
?
? The user can customize the vendor ID and product ID by using Mask ROM option.
??Supports 5 kinds of string descriptors (for Mask ROM code product only)
??On-chip sequencer
?
? There is an on-chip descriptor and request response sequencer. External initial setup and control is not needed and HUB functions can be realized using only the μPD72012.
??Downstream ports
?
? Four or five ports can be selected using a pin function.
??Power modes
?
? Bus power or self-power can be selected using a pin function (an external power control circuit is required).
??Corresponds to standard descriptor products
?
? Two kinds of standard ROM code products are provided. Standard and HUB class descriptors are on-chip in the μPD72012.
?? ROM code: 003 (individual overcurrent monitoring type Generic HUB)
?? ROM code: 004 (collective overcurrent monitoring type Generic HUB)
??Supports two kinds of clock input
??
? 48 MHz oscillator input or a 4 MHz crystal resonator can be supported
??Power control
?
? Port power control and overcurrent detection functions are on-chip. Individual port control or collective control can be selected for these.

特性 Features

? Compliant with Chapter 11 (HUB Specifications) of USB Specification 1.1.
??Descriptors into ROM
?
? The user can customize the vendor ID and product ID by using Mask ROM option.
??Supports 5 kinds of string descriptors (for Mask ROM code product only)
??On-chip sequencer
?
? There is an on-chip descriptor and request response sequencer. External initial setup and control is not needed and HUB functions can be realized using only the μPD72012.
??Downstream ports
?
? Four or five ports can be selected using a pin function.
??Power modes
?
? Bus power or self-power can be selected using a pin function (an external power control circuit is required).
??Corresponds to standard descriptor products
?
? Two kinds of standard ROM code products are provided. Standard and HUB class descriptors are on-chip in the μPD72012.
?? ROM code: 003 (individual overcurrent monitoring type Generic HUB)
?? ROM code: 004 (collective overcurrent monitoring type Generic HUB)
??Supports two kinds of clock input
??
? 48 MHz oscillator input or a 4 MHz crystal resonator can be supported
??Power control
?
? Port power control and overcurrent detection functions are on-chip. Individual port control or collective control can be selected for these.