UCC3946D屬于集成電路（IC）的監控器。由美國德州儀器公司制造生產的UCC3946D監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。

FEATURES

Fully Programmable Reset Threshold

Fully Programmable Reset Period

Fully Programmable Watchdog Period

2% Accurate Reset Threshold

Input Voltage Down to 2 V

Input 18-μA Maximum Input Current

Reset Valid Down to 1 V

DESCRIPTION

The UCCx946 is designed to provide accurate

microprocessor supervision, including reset and

watchdog functions. During power up, the device

asserts a reset signal RES with VDD as low as 1 V.

The reset signal remains asserted until the VDD

voltage rises and remains above the reset

threshold for the reset period. Both reset threshold

and reset period are programmable by the user.

The UCCx946 is also resistant to glitches on the

VDD line. Once RES has been deasserted, any

drops below the threshold voltage need to be of

certain time duration and voltage magnitude to

generate a reset signal. These values are shown

in Figure 1. An I/O line of the microprocessor may

be tied to the watchdog input (WDI) for watchdog

functions. If the I/O line is not toggled within a set

watchdog period, programmable by the user,

WDO is asserted. The watchdog function is

disabled during reset conditions.

The UCCx946 is available in 8-pin SOIC(D), 8-pin

PDIP (N) and 8-pin TSSOP(PW) packages to

optimize board space.