UCC2946TPWRQ1屬于集成電路（IC）的監控器。由美國德州儀器公司制造生產的UCC2946TPWRQ1監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。

1FEATURES

· Qualified for Automotive Applications

· Fully Programmable Reset Threshold

· Fully Programmable Reset Period

· Fully Programmable Watchdog Period

· 2% Accurate Reset Threshold

· Input Voltage Down to 2 V

· Input 18-mA Maximum Input Current

· Reset Valid Down to 1 V

DESCRIPTION

The UCC2946 is designed to provide accurate microprocessor supervision, including reset and watchdog

functions. During power up, the device asserts a reset signal RES with VDD as low as 1 V. The reset signal

remains asserted until the VDD voltage rises and remains above the reset threshold for the reset period. Both

reset threshold and reset period are programmable by the user.

The UCC2946 is also resistant to glitches on the VDD line. Once RES has been deasserted, any drops below

the threshold voltage need to be of certain time duration and voltage magnitude to generate a reset signal.

These values are shown in Figure 1. An I/O line of the microprocessor may be tied to the watchdog input (WDI)

for watchdog functions. If the I/O line is not toggled within a set watchdog period, programmable by the user,

WDO is asserted. The watchdog function is disabled during reset conditions.

The UCC2946 is available in 8-pin TSSOP (PW) package to optimize board space.