UA9638CDR屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的UA9638CDR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1 Features

? Meets or exceeds ANSI standard EIA/TIA-422-B

? Operates from a single 5V power supply

? Drives loads as low as 50Ω up to 15Mbps

? TTL- and CMOS-input compatibility

? Output short-circuit protection

? Interchangeable with DS9638

2 Applications

? Factory automation

? ATM and cash counters

? Smart grid

? AC and servo motor drives

3 Description

The uA9638 is a dual high-speed differential line

driver designed to meet ANSI Standard EIA/TIA-422-

B. The inputs are TTL and CMOS compatible and

have input clamp diodes. Schottky-diode-clamped

transistors are used to minimize propagation delay

time. This device operates from a single 5V power

supply and is supplied in an 8-pin package.

The uA9638 provides the current needed to drive lowimpedance

loads at high speeds. Typically used with

twisted-pair cabling and differential receiver(s), baseband

data transmission can be accomplished up to

and exceeding 15Mbps in properly designed systems.

The uA9637A dual line receiver is commonly used as

the receiver. For even faster switching speeds in the

same pin configuration, see the SN75ALS191.

The uA9638 is characterized for operation from 0°C to

70°C.