TVS0701DRBR屬于電路保護的TVS-混合技術。由美國德州儀器公司制造生產的TVS0701DRBRTVS - 混合技術混合技術 TVS（瞬態(tài)電壓抑制器）產品族中的產品屬于過壓保護產品，其中結合了基于多種技術的保護機制，例如串聯(lián)連接的 MOV（金屬氧化物壓敏電阻）和 GDT（氣體放電管），旨在同時獲得低漏電流和自恢復箝位工作特性。

1 Features

1? Protection Against 1-kV, 42-Ω IEC 61000-4-5

Surge Test for Industrial Signal Lines

? Bidirectional Polarity Enables Protection Against

Bipolar Signaling or Miswiring Conditions

? Clamping Voltage of 11 V at 30-A, 8/20-μs Surge

Current

? Standoff Voltage: ±7 V

? Small 3-mm × 3-mm SON Footprint

? Survives Over 5,000 Repetitive Strikes of 30-A,

8/20-μs Surge Current at 125°C

? Robust Surge Protection

– IEC61000-4-5 (8/20 μs): 30 A

– IEC61643-321 (10/1000 μs): 15 A

? Low Leakage Current

– 0.25-nA Typical at 27°C

– 200-nA Maximum at 85°C

? Low Capacitance: 77 pF

? Integrated Level 4 IEC 61000-4-2 ESD Protection

2 Applications

? Industrial Sensors

? Solid-State Drives

? 5-V Power Lines

? Appliances

? Medical Equipment

? Electrical Grid Protection and Control

3 Description

The TVS0701 device shunts up to 30 A of IEC

61000-4-5 fault current to protect systems from highpower

transients or lightning strikes. The device

survives the common industrial signal line EMC

requirement of 1-kV IEC 61000-4-5 open circuit

voltage coupled through a 42-Ω impedance. The

TVS0701 uses a feedback mechanism to ensure

precise flat clamping during a fault, keeping system

exposure lower than traditional TVS diodes. The tight

voltage regulation allows designers to confidently

select system components with a lower voltage

tolerance, lowering system costs and complexity

without sacrificing robustness. The TVS0701 has a

±7-V operating range to enable operation in systems

that require protection against reverse wiring

conditions.

In addition, the TVS0701 is available in a small SON

footprint designed for space constrained applications,

offering a significant size reduction compared to

standard SMA and SMB packages. Low device

leakage and capacitance ensure a minimal effect on

the protected line. To ensure robust protection over

the lifetime of the product, TI tests the TVS0701

against 5000 repetitive surge strikes at 125°C with no

shift in device performance.

The TVS0701 is part of TI's Flat-Clamp family of

surge devices. For a deeper look at the Flat-Clamp

family, refer to the Flat-Clamp Surge Protection

Technology for Efficient System Protection white

paper.