描述 Description

The TPT710xx device is an isolated CAN transceiver that meets the ISO11898 High-speed CAN (Controller Area Network) physical layer standard. The device is designed to be applied in CAN FD networks up to 5Mbps and to enhance timing margin and higher data rates in long and high-loading networks. As the design, the device features cross-wire, overvoltage, and loss of ground protection from -42V to +42V, overtemperature shutdown, and a -30V to +30V common-mode range. The VCCA is the power supply input for RXD and TXD I/O pins which support a wide range from 2.25V to 5.5V. The 2nd power supply VCCB of CAN BUS side which supports the range from 4.5V to 5.5V.

The devices integrate high-performance digital isolators with 5000VRMS (WSOP8, WSOP16 packages), 3750VRMS (SMP8 package), and isolation ratings per UL1577. These devices are also to be certified by VDE, UL, CSA, and CQC.

TPT710xx family is available in WSOP8, WSOP16, and SMP8 packages, and is characterized from -40°C to +125°C.

特性 Features

? Meet ISO11898 Standard

? Support CAN FD and data rates up to 5 Mbps

? Typical Loop Delay: 110 ns

? 5 V power supply, 3.0 V ~ 5.5 V IO interface

? Receiver Common Mode Input Voltage: ±30 V

? Bus Fault Protection: ±42 V

? Up to 5 kV RMS Isolation Rating (WSOP16)

? 10 kV Surge Capability (WSOP16)

? ±100 kV/μs typ CMTI

? Junction Temperatures from ?40°C to 150°C

? SOP8 and Wide-SOIC (WSOP8, WSOP16)

? BUS pin ESD Protection
? ±15 kV Human-Body Model

? ±1.5 kV Charged-Device Model


? Safety-Related Certifications:
? VDE Reinforced Insulation according to DIN VDE V 0884-11: 2017-01

? 3750 Vrms (SOP8) Isolation Rating per UL 1577

? CSA C22.2 No. 62368-1:19 3rd, IEC 62368- 1:2018 Ed. 3 and EN 62368-1:2020

? TUV Certification according to EN 60950-1 and EN 61010-1

? CQC Certification per GB4943.1-2011

應(yīng)用 Application

? Industrial Automation
? Motor Control
? Solar Inverters
? Battery Charging and Management