Features

? Meets the ISO 11898-2:2016 and SAE J2284-1 to SAE

J2284-5 Physical Layer Standards

? Supports CAN FD and Data Rating up to 5 Mbps

? Short Propagation Delay Times and Fast Loop Times

? 5-V Power Supply, I/O Voltage Range Supports 2.8-V

to 5.5-V MCU Interface

? Common-Mode Input Voltage: ±30 V

? Protection Feature:

– IEC 61000-4-2 ESD Protection up to ±15 kV

– Bus Fault Protection: ±42 V

– VCC and VIO (TPT1256 only) Under-voltage

Protection

– TXD Dominant Time-out Function and BusDominant Time-out Function

– Thermal Shutdown Protection

? Available in SOP8 Package and Leadless DFN3X3

Package

Applications

? All Devices Supporting Highly Loaded CAN Networks

? Field Industrial Automation, Sensors, and Drive

Systems

? Building, Security Control Systems

? Energy Storage systems

? Telecom Base Station Status and Control

Description

The TPT125x device is a CAN transceiver that meets

the ISO11898 High-speed CAN (Controller Area Network)

physical layer standard. The device is designed to be used

in CAN FD networks up to 5 Mbps, and to enhance timing

margin and higher data rates in long and high-loading

networks. As designed, the device features cross-wire,

overvoltage, and loss of ground protection from ?42 V to

+42 V, overtemperature shutdown, and a ?30 V to +30

V common-mode range. The TPT1256 has a secondary

power supply input for I/O level shifting the input pin

thresholds and RXD output level. The device comes with

a silent mode which is also commonly referred to as listenonly mode, and it includes many protection features to

enhance device and network robustness.

The TPT125x is available in SOP-8 and DFN3X3-8L

packages and characterized from –40°C to +125°C.