1 Features

? AEC-Q100 automotive qualified for automotive

applications

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature range

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? 3.5V to 95V input range (100V absolute maximum)

? Reverse input protection down to –65V

? Integrated 11V charge pump with 345μA capacity

? Low quiescent current, 35μA in operation

? Low 1.5μA shutdown current (EN/UVLO = Low)

? Two strong gate drivers (2A source and sink)

for back to back MOSFET driving with separate

control inputs (INP1, INP2)

? Adjustable short circuit protection (ISCP) using

external Rsense or MOSFET VDS sensing with

adjustable delay (TMR)

? High or low-side current sense configuration

(CS_SEL)

? Fault indication (FLT) during short circuit

fault, charge pump undervoltage, input

undervoltage, and short-circuit comparator

diagnosis (SCP_TEST)

? Adjustable input undervoltage lockout (UVLO)

? Pin-to-pin compatible with TPS1210-Q1

2 Applications

? Automotive 48V Li-ion battery management

system

? DC/DC converter

? Automotive power distribution box

? Cordless power tools

3 Description

The TPS48100-Q1 is a 100V low IQ smart high

side driver with protection and diagnostics. With wide

operating voltage range of 3.5V–95V, the device is

suitable for 12V, 24V, and 48V system designs. The

device can withstand and protect the loads from

negative supply voltages down to –65V.

It has two strong 2A (source and sink) gate

drivers with separate control inputs (INP1, INP2) to

drive back to back MOSFETs in common source

configuration. Strong GATE driving enables power

switching using parallel MOSFETs in high current

system designs.

The device provides adjustable short-circuit

protection. Auto-retry and latch-off fault behavior can

be configured. Current sensing can be done either

by an external sense resistor or by MOSFET VDS

sensing. High side or low side current sense resistor

configuration is possible by using CS_SEL pin input.

The device also features diagnosis of the internal

short circuit comparator using external control on

SCP_TEST input.

A low quiescent current (35μA, typical) in operation

enables always ON system designs. Quiescent

current reduces to 1.5μA (typical) with EN/UVLO low.

The TPS48100-Q1 is available in a 19-pin VSSOP

package.