TPL5010QDDCTQ1屬于集成電路（IC）的可編程定時器振蕩器。由美國德州儀器公司制造生產(chǎn)的TPL5010QDDCTQ1可編程定時器和振蕩器可以設(shè)置用來以指定頻率提供定時脈沖的器件。

1 Features

1? Qualified for Automotive Applications

? AEC-Q100 Qualified with the Following Results:

– Device Temperature Grade 1: –40°C to 125°C

Ambient Operating Temperature Range

– Device HBM ESD Classification Level 2

– Device CDM ESD Classification Level C5

? Current Consumption of 35 nA (typ) at 2.5 V

? Supply Voltage from 1.8 V to 5.5 V

? Selectable Time Intervals 100 ms to 7200 s

? Timer Accuracy 1% (Typical)

? Resistor Selectable Time Interval

? Watchdog Functionality

? Manual Reset

? TPL5x10Q Family of AEC-Q100 Nano-Power

System Timers

? TPL5010-Q1 - Supply Current 35 nA

– Low Power Timer

– Watchdog Function

– Programmable Delay Range

– Manual Reset

? TPL5110-Q1 - Supply Current 35 nA

– Low Power Timer

– MOS-Driver

– Programmable Delay Range

– Manual Reset

– One-Shot Feature

2 Applications

? Electric Vehicles

? Always On Systems

? Battery powered systems

? Clutch Actuator circuit

? Car Door Handle circuit

? Smart Key

? Remote current sensor

? Intruder Detection

3 Description

The TPL5010-Q1 Nano Timer is a low power, AECQ100

qualified timer with a watchdog feature ideal for

system wake up in duty cycled or battery powered

applications. In such systems the microcontroller

timer can be used for system wake-up, but if the

timer sleep current is high, up to 60-80% of the total

system current can be consumed by the

microcontroller timer in this sleep mode. Consuming

only 35 nA, the TPL5010-Q1 can replace the

functionality of the integrated microcontroller timer

and allow the microcontroller to be placed in a much

lower power mode. Such power savings extend the

operating life of batteries and enable the use of

significantly smaller batteries making the TPL5010-

Q1 ideal for power sensitive applications.. The

TPL5010-Q1 provides selectable timing intervals from

100 ms to 7200 s and is designed for interrupt-driven

applications. Some standards (such as EN50271)

require implementation of a watchdog for safety and

the TPL5010-Q1 realizes this watchdog function at

almost no additional power consumption. The

TPL5010-Q1 is available in a 6-pin SOT23 package.