features

Single-Chip CCD Analog Front-End

10-Bit, 40-MSPS?, A/D-Converter Single 3-V

Supply Operation

Very Low Power: 200 mW Typical, 2-mW

Power-Down Mode

Differential Nonlinearity Error:

< ±0.6 LSB Typical

Integral Nonlinearity Error: < ±1.75 LSB

Typical

Programmable Gain Amplifier (PGA) With

0-dB to 36-dB Gain Range (0.045 dB/Step)

Automatic or Programmable Optical Black

Level and Offset Calibration With Digital

Filter and Bad Pixel Limits

Additional DACs for External Analog

Setting

Serial Interface for Register Configuration

Internal-Reference Voltages

48-Pin TQFP Package

application

Digital Still Camera

Video Camcorder

description

The TLV990-40 is a complete CCD and video

signal processor/digitizer designed for digital still

camera and video camcorder applications.

The TLV990-40 performs all the analog-processing functions necessary to maximize the dynamic range,

corrects various errors associated with the CCD sensor, and then digitizes the results with an on-chip

high-speed analog-to-digital converter (ADC).

The key components of the TLV990-40 include: an input clamp circuit for CCD and analog video signals, a

correlated double sampler (CDS), a programmable-gain amplifier (PGA) with 0 to 36-dB gain range, two internal

digital-to-analog converters (DAC) for automatic or programmable optical black level and offset calibration, a

10-bit, 40-MSPS pipeline ADC, a parallel data port for easy microprocessor interface, a serial port for

configuring internal control registers, two additional DACs for external system control, and internal reference

voltages.

Designed in advanced CMOS process, the TLV990-40 operates from a single 3-V power supply with a normal

power consumption of 200 mW at 40 MSPS, and 2 mW in power-down mode.

Its very high throughput rate, single 3-V operation, very low-power consumption, and fully-integrated analog

processing circuitry make the TLV990-40 an ideal CCD and video signal-processing solution for electronic

video-camcorder applications.

This device is available in a 48-pin TQFP package and is specified over a –20°C to 75°C operating-temperature

range.