1 Features

? Rail-to-rail input and output

? Low input offset voltage: ±0.3mV

? Unity-gain bandwidth: 10MHz

? Low broadband noise: 10nV/√ Hz

? Low input bias current: 0.5pA

? Low quiescent current: 538μA

? Unity-gain stable

? Internal RFI and EMI filter

? Operational at supply voltages as low as 1.8V

? Easier to stabilize with higher capacitive load due

to resistive open-loop output impedance

? Shutdown version: TLV906xS

? Extended temperature range: –40°C to 125°C

2 Applications

? E-bikes

? Smoke detectors

? HVAC: heating, ventilating, and air conditioning

? Motor control: AC induction

? Refrigerators

? Wearable devices

? Laptop computers

? Washing machines

? Sensor signal conditioning

? Power modules

? Barcode scanners

? Active Filters

? Low-side current sensing

3 Description

The TLV9061 (single), TLV9062 (dual), and TLV9064

(quad) are single-, dual-, and quad- low-voltage, 1.8V

to 5.5V) operational amplifiers, op amps) with rail-torail

input and output swing capabilities.

These devices are highly cost-effective options for

applications where low-voltage operation, a small

footprint, and high capacitive load drive are required.

Although the capacitive load drive of the TLV906x

is 100pF, the resistive open-loop output impedance

makes stabilizing with higher capacitive loads simpler.

These op amps are designed specifically for lowvoltage

operation (1.8V to 5.5V), with performance

specifications similar to the OPAx316 and TLVx316

devices.

The TLV906xS devices include a shutdown mode that

allow the amplifiers to switch into standby mode with

typical current consumption less than 1μA.

The TLV906xS family helps simplify system design,

because the family is unity-gain stable, integrates the

RFI and EMI rejection filter, and provides no phase

reversal in overdrive condition.

Micro size packages, such as X2SON and X2QFN,

are offered for all the channel variants (single, dual

and quad), along with industry-standard packages,

such as SOIC, MSOP, SOT-23, and TSSOP.