8-Bit Resolution

2.7 V to 3.6 V VCC

Easy Microprocessor Interface or

Standalone Operation

Operates Ratiometrically or With VCC

Reference

Single Channel or Multiplexed Twin

Channels With Single-Ended or Differential

Input Options

Input Range 0 V to VCC With VCC Reference

Inputs and Outputs Are Compatible With

TTL and MOS

Conversion Time of 32 μs at

f(CLK) = 250 kHz

Designed to Be Functionally Equivalent to

the National Semiconductor ADC0831 and

ADC0832 at 3 V Supply

Total Unadjusted Error . . . ± 1 LSB

description

These devices are 8-bit successive-approximation analog-to-digital converters. The TLV0831 has single input

channels; the TLV0832 has multiplexed twin input channels. The serial output is configured to interface with

standard shift registers or microprocessors.

The TLV0832 multiplexer is software configured for single-ended or differential inputs. The differential analog

voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the

voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of

resolution.

The operation of the TLV0831 and TLV0832 devices is very similar to the more complex TLV0834 and TLV0838

devices. Ratiometric conversion can be attained by setting the REF input equal to the maximum analog input

signal value, which gives the highest possible conversion resolution. Typically, REF is set equal to VCC (done

internally on the TLV0832).

The TLV0831C and TLV0832C are characterized for operation from 0°C to 70°C. The TLV0831I and TLV0832I

are characterized for operation from ?40°C to 85°C.