描述 Description

The TLE9263BQX is a monolithic integrated circuit in an exposed pad VQFN-48 (7mm x 7mm) power package with Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI). The device is designed for various CAN-LIN automotive applications as main supply for the microcontrollerand as interface for a LIN and CAN bus network. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5V low-dropout voltage regulator with off-board protection for e.g. sensor supply, another 5V/3.3V regulator to drive an external PNP transistor, which can be used as an independent supply for off-board usage or in load sharing configuration with the main regulator VCC1, a HS-CAN transceiver supporting CAN FD and LIN transceiver for data transmission, highsideswitches with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device. Also implemented are a configurable timeout / window watchdog circuit with a reset feature, three Fail Outputs and an undervoltage reset feature. The device offers low-power modes in order to minimize current consumption on applications that are connected permanently to the battery. A wake-up from the low-power mode is possible via a message on the buses, via the bi-level sensitive monitoring/wake-up inputs as well as via cyclic wake. The device is designed to withstand the severe conditions of automotive applications.

特性 Features

? Very low quiescent current consumption in Stop- and Sleep Mode
? Periodic Cyclic Wake in SBC Normal- and Stop Mode
? Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode
? Low-Drop Voltage Regulator 5V, 250mA
? Low-Drop Voltage Regulator 5V, 100mA, protected features for off-board usage
? Low-Drop Voltage Regulator, driving an external PNP transistor - 5V in load sharing configuration or 5V/3.3V in stand-alone configuration, protected features for off-board usage. Current limitation by shunt resistor (up to 350mA with 470mΩ external shunt resistor) in stand-alone configuration
? High-Speed CAN Transceiver:– fully compliant to HS-CAN standard ISO 11898-2:2016– supporting CAN FD communication up to 5 Mbps
? Two LIN Transceivers LIN 2.2a, J2602 with configurable TXD timeout feature and LIN Flash Mode
? Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04
? Four High-Side Outputs 7Ω typ.
? Dedicated supply pin for High-Side Outputs
? Two General Purpose High-Voltage In- and Outputs (GPIOs) configurable as add. Fail Outputs, Wake Inputs, Low-Side switches or High-Side switches
? Three universal High-Voltage Wake Inputs for voltage level monitoring
? Alternate High-Voltage Measurement Function, e.g. for battery voltage sensing
? Configurable wake-up sources
? Reset Output
? Configurable timeout and window watchdog
? Up to three Fail Outputs (depending on configuration)
? Overtemperature and short circuit protection feature
? Wide supply input voltage and temperature range
? Software compatible to all SBC families TLE926x and TLE927x
? Green Product (RoHS compliant) & AEC Qualified
? PG-VQFN-48 leadless exposed-pad power package with Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI)

優勢:

簡介

TLE9263BQX屬于集成電路（IC）的專用。由制造生產的TLE9263BQX專用該系列產品可提供所需的功能，用以將信息源/信宿連到各種復雜或范圍狹窄應用中的傳感器、變送器、致動器、傳輸介質或其他此類端點。例如，汽車安全氣囊驅動器、車身控制和信息娛樂總線、自適應電纜均衡器、智能卡等等。