1 Features

? Operating voltage VCC range: 3 V to 5.5 V

? Flexible P-MOSFET driving options:

– Maximum driving current / sustaining voltage:

? 30 mA / 20 V: TLC69600

? 60 mA / 20 V: TLC69610

? 30 mA / 50 V: TLC69650

? 60 mA / 50 V: TLC69660

– Global 8-bit Maximum Current (MC) setting

– Individual 8-bit Channel Current (CC) setting

? High speed daisy chain interface:

– I/O voltage compatible with: 1.8 V / 3.3 V

– Data transfer rate: up to 20 MHz

? EMI enhancement:

– Programmable interface driving capability

? Display quality improvement:

– Minimum brightness update latency

– Programmable black insertion

– Variable refresh rate (VRR) without flickering

? Diagnostics:

– Device thermal shutdown detection

– Report interface option:

? UART and interrupt pin (INT)

? Two-wire output: CLK_O and SOUT

2 Applications

? LCD local dimming backlight:

– TV

– Monitor

– Notebook

– Tablet

3 Description

TLC696x0 is a scan MOSFET controller compatible

with current-sink driver TLC696x2/4/8 to achieve 2/4/8

time-multiplexing control. Each device integrates with

16 constant current sinks for up to 8 scan MOSFETs

control. The device equips with ghost-cancellation

function to eliminate upside ghosting.

To optimize system efficiency, the device equips with

adaptive headroom voltage control scheme to directly

control DC/DC. Only the FB pin from last device in

serial chain should be connected to DC/DC to acheive

simplified system layout. The device also integrates

minimum brightness update latency, black insertion

and VRR features to improve display quality.

TLC696x0 has three error flags: LED open detection

(LOD), LED short detection (LSD) and thermal

shutdown detection (TSD) for diagnostic. The device

implements two options for readback including

UART/INT and SOUT/CLK_O which is programmable

by register.