TLC59116ITPWRQ1屬于集成電路（IC）的LED驅動器。由美國德州儀器公司制造生產的TLC59116ITPWRQ1LED 驅動器器件屬于 LED 驅動器電源管理集成電路 (PMIC) 系列，可通過標稱固定電壓的電源為負載（通常為發光二極管）提供電流，并且電流可控。它與用于電壓調節的類似產品的主要區別在于，這類器件提供較低的反饋電壓（以提高系統能效），而且通?？蓪?duì)器件工作點進行外部控制，可在照明應用中用于實現調光功能。

1 Features

? 16 LED Drivers (Each Output Programmable at

Off, On, Programmable LED Brightness, or

Programmable Group Dimming and Blinking

Mixed With Individual LED Brightness)

? 16 Constant-Current Output Channels

? 256-Step (8-Bit) Linear Programmable Brightness

Per LED Output Varying From Fully Off (Default)

to Maximum Brightness Using a 97-kHz PWM

Signal

? 256-Step Group Brightness Control Allows

General Dimming [Using a 190-Hz PWM Signal

From Fully Off to Maximum Brightness (Default)]

? 256-Step Group Blinking With Frequency

Programmable From 24-Hz to 10.73 s and Duty

Cycle From 0% to 99.6%

? Four Hardware Address Pins Allow 14 TLC59116-

Q1 Devices to Be Connected to Same I2C Bus

? Four Software-Programmable I2C Bus Addresses

(One LED Group Call Address and Three LED

Sub Call Addresses) Allow Groups of Devices to

Be Addressed at Same Time in Any Combination

? Software Reset Feature (SWRST Call) Allows

Device to Be Reset Through I2C Bus

? Up to 14 Possible Hardware-Adjustable Individual

I2C Bus Addresses Per Device, So That Each

Device Can Be Programmed

? Open-Load and Overtemperature Detection Mode

to Detect Individual LED Errors

? Output State Change Programmable on

Acknowledge or Stop Command to Update

Outputs Byte-by-Byte or All at Same Time (Default

to Change on Stop)

? Output Current Adjusted Through an External

Resistor

? Constant Output Current Range: 5-mA to 120-mA

? Maximum Output Voltage: 17 V

? 25-MHz Internal Oscillator Requires No External

Components

? 1-MHz Fast-mode Plus (FMT) Compatible I2C-Bus

Interface With 30-mA High-Drive Capability on

SDA Output for Driving High-Capacitive Buses

? Internal Power-On Reset

? Noise Filter on SCL and SDA Inputs

? No Glitch on Power-Up

? Active-Low Reset

? Supports Hot Insertion

? Low Standby Current

? 3.3 V or 5 V Supply Voltage

? 5.5 V Tolerant Inputs

? 28-Pin Thin Shrink Small-Outline Package

(TSSOP) (PW-28)

? –40°C to +105°C Operation

2 Applications

? General LED Lighting Applications

? Backlight for center stack buttons

? Backlight for cluster indicators

3 Description

The TLC59116-Q1 is an I2C-Bus controlled 16-

channel LED driver that is optimized for

red/green/blue/amber (RGBA) color mixing and

backlight application. Each LED output has its own 8-

bit resolution (256 steps) fixed-frequency individual

PWM controller that operates at 97-kHz, with a duty

cycle that is adjustable from 0% to 99.6%.