TLC5620CDRG4屬于集成電路（IC）的數模轉換器（DAC）。由美國德州儀器公司制造生產的TLC5620CDRG4數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字數據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。

Four 8-Bit Voltage Output DACs

5-V Single-Supply Operation

Serial Interface

High-Impedance Reference Inputs

Programmable 1 or 2 Times Output Range

Simultaneous Update Facility

Internal Power-On Reset

Low-Power Consumption

Half-Buffered Output

applications

Programmable Voltage Sources

Digitally Controlled Amplifiers/Attenuators

Mobile Communications

Automatic Test Equipment

Process Monitoring and Control

Signal Synthesis

description

The TLC5620C and TLC5620I are quadruple 8-bit voltage output digital-to-analog converters (DACs) with

buffered reference inputs (high impedance). The DACs produce an output voltage that ranges between either

one or two times the reference voltages and GND, and the DACs are monotonic. The device is simple to use,

running from a single supply of 5 V. A power-on reset function is incorporated to ensure repeatable start-up

conditions.

Digital control of the TLC5620C and TLC5620I are over a simple three-wire serial bus that is CMOS compatible

and easily interfaced to all popular microprocessor and microcontroller devices. The 11-bit command word

comprises eight bits of data, two DAC-select bits, and a range bit, the latter allowing selection between the times

1 or times 2 output range. The DAC registers are double buffered, allowing a complete set of new values to be

written to the device, then all DAC outputs are updated simultaneously through control of LDAC. The digital

inputs feature Schmitt triggers for high noise immunity.

The 14-terminal small-outline (D) package allows digital control of analog functions in space-critical

applications. The TLC5620C is characterized for operation from 0°C to 70°C. The TLC5620I is characterized

for operation from –40°C to 85°C. The TLC5620C and TLC5620I do not require external trimming.