TLC5510INSR屬于集成電路（IC）的模數轉換器（ADC）。由美國德州儀器公司制造生產的TLC5510INSR模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

features

Analog Input Range

– TLC5510 . . . 2 V Full Scale

– TLC5510A . . . 4 V Full Scale

8-Bit Resolution

Integral Linearity Error

±0.75 LSB Max (25°C)

±1 LSB Max (–20°C to 75°C)

Differential Linearity Error

±0.5 LSB Max (25°C)

±0.75 LSB Max (–20°C to 75°C)

Maximum Conversion Rate

20 Mega-Samples per Second

(MSPS) Max

5-V Single-Supply Operation

Low Power Consumption

TLC5510 . . . 127.5 mW Typ

TLC5510A . . . 150 mW Typ

(includes reference resistor dissipation)

TLC5510 is Interchangeable With Sony

CXD1175

applications

Digital TV

Medical Imaging

Video Conferencing

High-Speed Data Conversion

QAM Demodulators

description

The TLC5510 and TLC5510A are CMOS, 8-bit, 20

MSPS analog-to-digital converters (ADCs) that

utilize a semiflash architecture. The TLC5510 and

TLC5510A operate with a single 5-V supply and

typically consume only 130 mW of power.

Included is an internal sample-and-hold circuit,

parallel outputs with high-impedance mode, and

internal reference resistors.

The semiflash architecture reduces power

consumption and die size compared to flash

converters. By implementing the conversion in a

2-step process, the number of comparators is

significantly reduced. The latency of the data

output valid is 2.5 clocks.

The TLC5510 uses the three internal reference

resistors to create a standard, 2-V, full-scale

conversion range using VDDA. Only external jumpers are required to implement this option and eliminates the

need for external reference resistors. The TLC5510A uses only the center internal resistor section with an

externally applied 4-V reference such that a 4-V input signal can be used. Differential linearity is 0.5 LSB at 25°C

and a maximum of 0.75 LSB over the full operating temperature range. Typical dynamic specifications include

a differential gain of 1% and differential phase of 0.7 degrees.

The TLC5510 and TLC5510A are characterized for operation from –20°C to 75°C.