TLC0832CP屬于集成電路（IC）的模數轉換器（ADC）。由美國德州儀器公司制造生產的TLC0832CP模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

8-Bit Resolution

Easy Microprocessor Interface or

Standalone Operation

Operates Ratiometrically or With 5-V

Reference

Single Channel or Multiplexed Twin

Channels With Single-Ended or Differential

Input Options

Input Range 0 to 5 V With Single 5-V Supply

Inputs and Outputs Are Compatible With

TTL and MOS

Conversion Time of 32 ms at

fclock = 250 kHz

Designed to Be Interchangeable With

National Semiconductor ADC0831 and

ADC0832

Total Unadjusted Error . . . ± 1 LSB

description

These devices are 8-bit successive-approximation analog-to-digital converters. The TLC0831 has single input

channels; the TLC0832 has multiplexed twin input channels. The serial output is configured to interface with

standard shift registers or microprocessors.

The TLC0832 multiplexer is software configured for single-ended or differential inputs. The differential analog

voltage input allows for common-mode rejection or offset of the analog zero input voltage value. In addition, the

voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of

resolution.

The operation of the TLC0831 and TLC0832 devices is very similar to the more complex TLC0834 and TLC0838

devices. Ratiometric conversion can be attained by setting the REF input equal to the maximum analog input

signal value, which gives the highest possible conversion resolution. Typically, REF is set equal to VCC (done

internally on the TLC0832).

The TLC0831C and TLC0832C are characterized for operation from 0°C to 70°C. The TLC0831I and TLC0832I

are characterized for operation from –40°C to 85°C.