Application Information

The TIP903 is an IndustryPack? compatible module with three extended CAN bus interfaces using three 82527 CAN controllers.

The controllers support the standard data and remote frame as well as the extended data and remote frame according to CAN specification 2.0 part A and part B (standard 11 bit identifier and extended 29 bit identifier).

It has the capability to transmit, receive and perform message filtering on extended and standard messages.

The TIP903 supports a 16 bit bus interface which permits word and byte accesses to the internal registers of the three CAN controllers. The physical interface supports CAN High Speed according to ISO11898 for each of the three channels.

The bus line termination is selectable by jumpers separate for each bus line. The data transfer rates of up to 1 Mbps are supported for a bus line length of 40 m.

Software Support (TIP903-SW-xx) for different operating systems is available.