THS1207IDA屬于集成電路（IC）的模數轉換器（ADC）。由美國德州儀器公司制造生產的THS1207IDA模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。

FEATURES

Simultaneous Sampling of 4 Single-Ended

Signals or 2 Differential Signals or

Combination of Both

Signal-to-Noise and Distortion Ratio:

68 dB at fI = 2 MHz

Differential Nonlinearity Error: ±1 LSB

Integral Nonlinearity Error: ±1.5 LSB

Auto-Scan Mode for 2, 3, or 4 Inputs

3-V or 5-V Digital Interface Compatible

Low Power: 216 mW Max at 5 V

Power Down: 1 mW Max

5-V Analog Single Supply Operation

Internal Voltage References . . . 50 PPM/°C

and ±5% Accuracy

Glueless DSP Interface

Parallel μC/DSP Interface

APPLICATIONS

Radar Applications

Communications

Control Applications

High-Speed DSP Front-End

Automotive Applications

DESCRIPTION

The THS1207 is a CMOS, low-power, 12-bit, 6 MSPS

analog-to-digital converter (ADC). The speed,

resolution, bandwidth, and single-supply operation are

suited for applications in radar, imaging, high-speed

acquisition, and communications. A multistage

pipelined architecture with output error correction logic

provides for no missing codes over the full operating

temperature range. Internal control registers are used

to program the ADC into the desired mode. The

THS1207 consists of four analog inputs, which are

sampled simultaneously. These inputs can be selected

individually and configured to single-ended or

differential-inputs. Internal reference voltages for the

ADC (1.5 V and 3.5 V) are provided. An external

reference can also be chosen to suit the dc accuracy

and temperature drift requirements of the application.

The THS1207C is characterized for operation from 0°C

to 70°C, the THS1207I is characterized for operation

from –40°C to 85°C.