1 General description

The TEA2376AT is a digital configurable two-phase interleaved PFC controller for high-efficiency power supplies. The PFC operates in discontinuous conduction mode or quasi-resonant mode with valley switching to optimize efficiency. The TEA2376AT enables the building of an interleaved power factor controller, which is easy to design with a low external component count.

The TEA2376AT is available in a low profile and narrow body-width SO10. The digital architecture of the TEA2376AT is based on a high-speed configurable hardware state machine ensuring reliable real-time performance. To meet specific application requirements, many operation and

protection settings of the PFC controller can be adjusted by loading new settings into the device with I2C during power supply development. For a high power factor and a low THD, input current shaping is used. A notch filter allows a faster transient response by suppressing the mains frequency component in the regulation loop, while maintaining a low THD. For low-load operation with good efficiency, phase shedding and burst mode operation are included. To meet

the efficiency and standby power regulations of Energy Star, the Department of Energy, the Eco-design directive of the European Union, the European Code of Conduct, and other guidelines, the power consumption of the IC is reduced in burst mode operation. The TEA2376AT contains many protections, like internal and external overtemperature protection (OTP), overcurrent protection (OCP), dual overvoltage protection (OVP), inrush current protection (ICP), pin open,

pin short protection, and phase fail protection. The protections can be configured independently and using programmable parameters. The TEA2376AT allows an easy to design, highly efficient, and reliable interleaved PFC, for power levels up typically to 1000 W1.

2 Features and benefits

2.1 Distinctive features

? Interleaved PFC controller in an SO10 package

? Programmable phase shedding and burst mode operation

? Dual output over voltage protection

? Inrush current protection

? High power factor (PF) and low total harmonic distortion (THD), also at high input voltages

? Many parameters can be configured during evaluation with the use of a user-friendly graphical user interface

(GUI)

? Good phase control over full input voltage range

? Low audible noise

2.2 Green features

? Valley/zero voltage switching for minimum switching losses

? High efficiency from high load to medium load and low load by phase shedding and burst mode operation

2.3 Protection features

? Protections can independently be set to latched, safe restart, or latched after several attempts to restart

? Dual output overvoltage protection (OVP)

? Supply undervoltage protection (UVP) and overvoltage protection (OVP)

? Internal and external overtemperature protection (OTP)

? Overcurrent protection (OCP)

? Inrush current protection (ICP)

? Brownin/brownout protection

? Open and short pin protection

? Coil short protection

? Output diode short protection

? Open control loop protection

? Phase fail protection

3 Applications

? HD and U-HD television

? Server

? Desktop and all-in-one PCs

? Gaming consoles

? High-power adapter

? 5G supplies

? Home audio