DESCRIPTION

The TDA7375A is a new technology class AB car radio amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantee the highest power performances with extremely reduced component count. The on board clip detector simplifies gain compression operation. The fault diagnostic makes it possible to detect mistakes during car radio set assembly and wiring in the car.

■ HIGH OUTPUT POWER CAPABILITY

2 x 43W/4? MAX

2 x 37W/4? EIAJ

2 x 26W/4? @14.4V, 1KHz, 10

4 x 7W/4? @14.4V,1KHz, 10

4 x 12W/2? @14.4V, 1KHz, 10

■ MINIMUM EXTERNAL COMPONENTS COUNT:

– NO BOOTSTRAP CAPACITORS

– NO BOUCHEROT CELLS

– INTERNALLY FIXED GAIN (26dB BTL)

■ ST-BY FUNCTION (CMOS COMPATIBLE)

■ NO AUDIBLE POP DURING ST-BY OPERATIONS

■ DIAGNOSTICFACILITIES

– CLIPDETECTOR

– OUT TO GND SHORT

– OUT TO VS SHORT

– SOFT SHORT AT TURN-ON

– THERMAL SHUTDOWN PROXIMITY

Protections:

■ OUPUT AC/DC SHORT CIRCUIT

– TO GND

– TO VS

– ACROSS THE LOAD

■ SOFT SHORT AT TURN-ON

■ OVERRATING CHIP TEMPERATURE WITH SOFT THERMAL LIMITER

■ LOAD DUMP VOLTAGE SURGE

■ VERY INDUCTIVE LOADS

■ FORTUITOUS OPEN GND

■ REVERSED BATTERY

■ ESD