1 Features

? AEC-Q100 (Grade 0) Qualified for automotive

applications

? Meets the requirements of ISO 11898-2:2016

physical layer standard

? Functional Safety-Capable

– Documentation available to aid in functional

safety system design

? Support of classical CAN and optimized CAN FD

performance at 2, 5, and 8 Mbps

– Short and symmetrical propagation delays for

enhanced timing margin

? I/O voltage range supports 1.7 V to 5.5 V

? Support for 12-V and 24-V battery applications

? Receiver common mode input voltage: ±12 V

? Protection features:

– Bus fault protection: ±58 V

– Undervoltage protection

– TXD-dominant time-out (DTO)

? Data rates down to 9.2 kbps

– Thermal-shutdown protection (TSD)

? Operating modes:

– Normal mode

– Low power standby mode supporting remote

wake-up request

? Optimized behavior when unpowered

– Bus and logic pins are high impedance (no load

to operating bus or application)

– Hot-plug capable: power up/down glitch-free

operation on bus and RXD output

? 8-Pin SOIC and small footprint SOT-23 package

2 Applications

? Automotive and transportation

– Body control modules

– Automotive gateway

– Advanced driver assistance system (ADAS)

– Infotainment

3 Description

The TCAN1044AEV-Q1 is a high-speed controller

area network (CAN) transceiver that meets the

physical layer requirements of the ISO 11898-2:2016

high-speed CAN specification.

The transceiver has a certified electromagnetic

compatibility (EMC) operation making it a suitable

choice for classical CAN and CAN FD networks up

to 5 megabits per second (Mbps). Up to 8 Mbps

operation in simpler networks is possible with these

devices. The device includes internal logic level

translation via the VIO pin to allow for interfacing the

transceiver I/O's directly to 1.8-V, 2.5-V, 3.3-V, or 5-

V logic levels. The transceiver supports a low-power

standby mode and wake over CAN which is compliant

to the ISO 11898-2:2016 defined wake-up pattern

(WUP).

The transceiver also includes thermal-shutdown

(TSD), TXD-dominant time-out (DTO), supply

undervoltage detection, and ±58-V bus fault

protection. The device has defined fail-safe behavior

in supply undervoltage or floating pin scenarios.