Low Voltage/Low Power 4-Bit × 2 Dual Supply Bus Transceiver with Bushold

The TC7MP3245FTG is a dual supply, advanced high-speed CMOS 8-bit dual supply voltage interface bus transceiver fabricated with silicon gate CMOS technology.

Designed for use as an interface between a 1.2-V, 1.5-V, 1.8-V, or 2.5-V bus and a 1.8-V, 2.5-V or 3.6-V bus in mixed 1.2-V, 1.5-V, 1.8-V or 2.5-V/1.8-V, 2.5-V or 3.6-V supply systems.

The A-port interfaces with the 1.2-V, 1.5-V, 1.8-V or 2.5-V bus, the B-port with the 1.8-V, 2.5-V, 3.3-V bus.

The direction of data transmission is determined by the level of the DIR input. The enable input ( OE ) can be used to disable the device so that the buses are effectively isolated. The bus of a B bus side at floating state is maintained in an appropriate logic level due to a bushold circuit to a B bus. Moreover, the bushold circuit which is added to a B bus is off when OE is low.

All inputs are equipped with protection circuits against static discharge or transient excess voltage.

特性 Features

? Bidirectional interface between 1.2-V and 1.8-V, 1.2-V and 2.5-V, 1.2-V and 3.3-V, 1.5-V and 2.5-V, 1.5-V and 3.3-V, 1.8-V and 2.5-V, 1.8-V and 3.3-V or 2.5-V and 3.3-V buses.

? High-speed operation:

tpd = 6.8 ns (max) (VCCA = 2.5 ± 0.2 V, VCCB = 3.3 ± 0.3 V)

tpd = 8.9 ns (max) (VCCA = 1.8 ± 0.15 V, VCCB = 3.3 ± 0.3 V)

tpd = 10.3 ns (max) (VCCA = 1.5 ± 0.1 V, VCCB = 3.3 ± 0.3 V)

tpd = 61 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 3.3 ± 0.3 V)

tpd = 9.5 ns (max) (VCCA = 1.8 ± 0.15 V, VCCB = 2.5 ± 0.2 V)

tpd = 10.8 ns (max) (VCCA = 1.5 ± 0.1 V, VCCB = 2.5 ± 0.2 V)

tpd = 60 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 2.5 ± 0.2 V)

tpd = 58 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 1.5 ± 0.1 V)

? Output current :

IOH/IOL = ±12 mA (min) (VCC = 3.0 V)

IOH/IOL = ±9 mA (min) (VCC = 2.3 V)

IOH/IOL = ±3 mA (min) (VCC = 1.65 V)

IOH/IOL = ±1 mA (min) (VCC = 1.4 V)

? Latch-up performance: ±300 mA

? ESD performance: Machine model ≥ ±200 V

Human body model ≥ ±2000 V

? Ultra-small package: VQON24

? Bushold circuit is build in only the B bus side. (Only in OE = “H”, a former state is maintained.)

? Low current consumption : Using the new circuit significantly reduces current consumption when OE = “H”.

Suitable for battery-driven applications such as PDAs and cellular phones.

? Floating A-bus and B-bus are permitted. (when OE = “H”)

? 3.6-V tolerant function provided on A-bus terminal, DIR and OE terminal.