2. Application

SSD (Solid State Drive), portable devices, etc.

3. Features

? Power supply voltage (VIN): 2.9 V to 5.5 V

(PVIN1 to 6): 2.9 V to 5.5 V

(LDO1_IN): 2.9 V to 5.5 V

? IC operation condition setting when the power supply voltage is set to 3.3 V/5.0 V by MODE_SEL pin.

? 6 CH DC-DC convertor + 2 CH LDO

? CH1: 2.325 V to 2.700 V (25 mV step), 4.0 A (MAX)

?CH2: 1.175 V to 1.550 V / 1.025 V to 1.400 V (25 mV step), 1.0 A (MAX)

?CH3: 1.625 V to 2.000 V (25 mV step), 2.0 A(MAX)

? CH4: 0.825 V to 1.200 V / 1.625 V to 2.000 V (25 mV step), 1.0 A (MAX)

? CH5: 0.825 V to 1.200 V / 0.725 V to 1.100 V (25 mV step), 1.0 A (MAX)

? CH6: 0.825 V to 1.200 V / 0.725 V to 1.100 V (25 mV step), 3.5 A (MAX)

? LDO1: 2.325 V to 2.700 V / 1.625 V to 2.000 V (25 mV step), 0.3 A (MAX)

? LDO2: 3.125 V to 3.500 V (25 mV step), 0.3 A (MAX)

? Built-in BYPASS-SW: CH1, LDO2

? Built-in LOAD-SW: CH5

? Efficiency control in the case of the light load (PWM/PFM operation)

? Control by I2C interface

? Initial values selection of DC-DC (CH1 to CH6) and LDO1 output by VSEL0 pin

? Built-in input PROTECTION-SW

? Built-in protection functions

?Low input voltage detection circuit (UVLO)

?Input power supply Over Voltage Protection (OVP_1)

?Input power supply Over Current Limitation (OCL_1)

?Input power supply Over Current Protection (OCP)

?Output Over Voltage Protection (OVP_2)

?Output Under Voltage Protection (UVP)

?Output Over Current Limitation (OCL_2)

?Thermal Shutdown protection (TSD)

? Package: S-UFBGA45-0403-0.40-001 (2.91 mm ×3.31 mm, 0.4 mm Pitch)